You will need to purchase corresponding dies to install these snaps with your KAM table press.
Disclaimer: Our size 20 fashion spring snaps do require some pulling to remove from the press dies once installed, which could result in ripping. Therefore, these snaps are *not* suitable for delicate, thin, or stretchy material.
Each set includes 1 cap, 1 post, 1 socket, and 1 stud. Cap diameter is 1/2" (12.4mm).
Snaps are packaged by weight so count is approximate. Different production batches may have very slight variances in appearance. This will be noticeable only on close inspection and should not affect functionality if applied properly.