Pronged Studs

There are 100 pcs in each pack. 

If you need to attach more than 2 layers of material together, you can create double-sided snaps using our pronged studs.  Pronged studs take the place of the cap. 

For example, you would normally have:

(cap+socket) attached to (stud+cap)

With the pronged studs, you can now have:

(cap+socket) attached to (stud+pronged stud) attached to (socket+cap)

Pronged studs cannot be applied using our pliers.  You will need a special pronged stud die for our KAM presses, which you can add by selecting the option from the drop-down menu above or from our Dies section.  If using the drop-down menu above, the number of dies added will equal the Qty specified, so if you only need 1 die, be sure the Qty is set to 1.

Note:

KAM Snaps

Our KAM snaps are intended to be used with our pliers for plastic snaps or KAM press dies.  We cannot guarantee compatibility if you are using our snaps with other non-KAM products.

Snap Count

Snaps are packaged by weight, so count may not be exact.   Also, if you order multiples of a color, we may combine the sets.  For example, if you purchase two bags of 100-count studs, we may send you one bag of 200 studs.

Snap Colors
Due to imperfect and natural variations in lighting as well as individual settings of your computer screen, snap colors shown on our website may not be a true reflection of their actual color.  If you are unsure of a color, please feel free to inquire.  Or you can purchase a color card or snap sample here.